THIS IS FOR THE CR10SE PRINTER ONLY

This is a mounting system for the 5w CV falcon laser to be used with the CR10se which was originally advertised as compatible to the laser. Apparently no mount was made for the cr10se printer model up to this point.

Has 2 parts:

Upper which will can stay on top of the extruder assembly case.

Lower which is the one connected to the laser module and snaps-on to the upper mount.

Screw should be the same diameter as the original screw of the extruder case but 6.5mm length.

Your payment will be donations to further develop new mods for the CR10se and improve the CR10se platform and community. Thank you in advanced for your support. Updates to this mount will be uploaded to this same posting for old donators to get updated versions for free.

Required:

- ABS (no to petg because of flex as tested) or ASA

- Enclosed printer

- Also need to do some sanding on the lego style snap-on part

- Calibrate the pressure advanced to make thr corners sharper as this will affect the snap-on part

- Printer leveling before you start the print

Printing/slicer settings:

- Wall count 3 or 4 (higher is better for rigidity)

- Infill 30% or higher to minimize x axis wobbling during use

- For best layer adhesion use 80-100mm/s print speed, 100-120mm/s travel speed

- Use support everywhere for a normal support (don't use organic or tree as this is a functional and angular model)

- Brim for build plate adhesion - this is important for supports to be stable

Creality 5w CV Falcon Laser Mount for Creality CR10se