Diagram Explanation – Gohan (Super Saiyan 2)

Character Name: Gohan

Form: Super Saiyan 2

Series: Dragon Ball Z

Visual Characteristics

Hair:

Sharp, spiked golden hair

More rigid and defined spikes than Super Saiyan 1

Slight upward direction with clear separation between strands

Aura & Energy:

Bright golden aura

Blue electric lightning bolts (key identifier of SSJ2)

Floating debris/rocks caused by intense energy output

Facial Expression:

Aggressive, focused eyes

Tight jaw / shouting pose

Expression shows controlled rage and power

Body & Pose:

Muscular but lean physique

Power stance (legs apart, fists clenched)

Tension visible in arms, shoulders, and chest

Clothing:

Torn purple gi

Blue belt and wristbands

Damage details emphasize battle intensity

Best 3D Printing Settings (High-Detail Figure)

Recommended Printing Technology

✔ Resin Printer (SLA / MSLA / DLP)

Strongly recommended for anime figures due to fine details (hair, face, lightning).

Model Preparation

Scale:

18–25 cm height (best balance between detail and stability)

Wall Thickness:

Minimum: 1.5–2.0 mm

Separate Parts (Highly Recommended):

Head

Hair

Body

Arms

Base / Energy effects

Resin Print Settings (Typical)

Layer Height:

0.03 – 0.05 mm

Exposure Time:

Depends on resin (usually 2–3 sec per layer)

Bottom Layers:

6–8 layers

Bottom Exposure:

25–35 sec

Orientation

Tilt model 30–45°

Avoid flat surfaces directly on the build plate

Hair should be angled to preserve spike sharpness

Supports

Type: Light + Medium supports

Critical Areas:

Hair tips

Chin

Fingers

Lightning effects

Tip Diameter:

0.3–0.4 mm for fine detail

Post-Processing

Isopropyl alcohol wash (2 stages)

UV cure (2–5 minutes per side)

Sand lightly (800–1200 grit)

Primer (Grey or White recommended)

Painting Recommendation

Hair: Metallic or pearl yellow base + light orange shading

Aura: Transparent yellow resin or airbrush glow

Lightning: Light blue → white highlight

Eyes: Hand-painted for maximum realism

Gohan (Super Saiyan 2)

0.2mm layer, 4 walls, 15% infill