Beautiful intertwined disco hearts, that can be printed & hanged easily.

Perfect as decoration, as a gift or a sunday afternoon activity to do together with your SO.

For the full set of two intertwined hearts you need to print:

-2x Heart_Complete.stl

If Heart_Complete.stl does not fit your build plate, you can print the pieces individually:

-2x Heart_Pins.stl

-4x Heart_Left.stl

-4x Heart_Right.stl

You will also need 2 rolls of self adhesive disco tape, which will be enough to cover both hearts. (Rolls usually come in rolls of 3200)

If you want to hang your hearts, you will also need some string.

Assembly

Align the pins according to their lettering with the left & right sides of the heart and push them together. You might have to use some force to push them together. They should friction fit, but optionally you can add glue.

If you want to hang the hearts, tie a string around the 'A' pin of the top heart before pushing them together.

After the hearts have been put together you can start adding the disco tape.

You can either do it yourself or do it with a loved one as a fun afternoon activity :)

Intertwined Disco Hearts

0.2mm layer, 2 walls, 15% infill

0.2mm layer, 2 walls, 15% infill