LED Lamp with Chanel Logo – Two-Part Design (PETG)

I designed and printed a decorative LED lamp featuring the Chanel logo.
The model consists of two separate parts:

a white inner body, fully illuminated from the back

a black outer frame, forming the visible contour

After printing, both parts are simply plugged together – no glue required.

Special Design Feature

The white inner body is more than just a glowing surface.
Several small Chanel logos are embedded as 3D elements on the front face.

When the lamp is switched on and the body lights up in a single color, these fine logos become visible and subtly highlighted.
This creates an elegant 3D depth effect, especially noticeable with color changes or dimmed lighting.

Lighting

An LED strip is installed inside the lamp.
It can be controlled via remote control, allowing color changes and lighting effects.
Perfect as ambient lighting, decorative lamp, or stylish accent light.

Print Settings (Creality K2 Plus)

Material: PETG
Colors:

Inner body: White

Frame: Black

Quality: High Quality

Layer height: 0.2 mm

First layer: 0.24 mm

Seam position: Back

Z-seam: Contour setting

Wall order: Inner – Outer – Inner

Walls & Infill:

Wall loops: 4

Bottom layers: 4

Top layers: 4

Infill density: 15 %

Supports:

Enabled

Type: Tree

Style: Organic

Placement: Build plate only

Lamp with Chanel Logo

0.2mm layer, 4 walls, 15% infill