THIS IS A WORK IN PROGRESS !!!

Due to some unexpected and, quite frankly, unwanted trouble with a sewer line resulting in flooding i can either try to shrink down to about 20cm heigth or build a sewer cam car to find out what is going on.
This is a seriously for-my-special-needs model, meaning, i am (at last for now g) quite hopeful that it will perform as expected, namely traveling down a sewer line and be retrieveable. If you intend to build this and use it for yoursekf, keep in mind that you are on your own if it does not perform as you would like, namely if it gets stuck and has to be removed by burning up massive amounts of money ;). As always, users beware, and user disrection is highly advised.

No mode of propulsion as of yet. my sewer problem "should" point all the way down, thus i intend to let gravity do its thing. If things do tend an upwards turn i will try to come up with something interesting, but, not at this point in time.

Still not complete as of 2/2025, but nearly. Last parts are printed right now.

Unfortunately, you will NOT be able to print all the parts. The axels and the rope post i turned for stability reasons from aluminium, the pins through the wheels are steel spring pins. Same goes for the platform itself, this i made from 22mm trailer floor (....leftovers from a different project g)
Of course, you are totally welcome to try and print these parts, just dont be surprised if the thing breaks down 15m into a sewer line, thus blocking it up for eternity ;).

Sewer line inspection cam car

0.2mm layer, 2 walls, 15% infill