Design Concept

This model is designed with a rational mechanical structure that combines functionality with visual appeal. The internal geometry has been carefully optimized to provide smooth movement, structural strength, and long-term durability. At the same time, the outer form maintains a clean and balanced aesthetic, making the model both practical and visually engaging.
Print Settings

Recommended Printer: Creality K1

Material: PLA

Layer Height: 0.10 mm

Infill: 20%

Supports:

10% density

Only required on panel tabs

60° support angle for easy removal

Outer Shell: No supports required

Bed Adhesion: Brim recommended

Estimated Print Time: ~3 hours

These settings provide a good balance between surface quality, strength, and print reliability.

Assembly Instructions

Align all printed components, including gears, panels, and connectors.

Fix the parts together using 2.5 mm screws (2 cm length).

Ensure proper alignment of the internal gear system before final tightening.

Insert the assembled mechanism into the outer shell slots.

Check that all gears rotate smoothly and adjust screw tension if needed.

No glue is required. Assembly is simple and suitable for beginners.

Ur's Expected Gear Cube