3D model description

FOLLOW ME FOR MORE TO COME!

This cut and press has a very unique look. Not the normal cookie cutter. It makes a hole in the centre for a filling like jam/jelly/ jell-O.

It has a sharp cutting edge of 0.4mm.

Size: 60mm x 60mm x 23mm

Tested by a client who is very happy with the results. See pic of cookie.

Look for the other thumbprint cutters on my Page!

THIS MODEL IS STRICTLY FOR HOME USE!! NO SELLING OF ANY KIND ALLOWED EXCEPT FOR THE COOKIE.

PRINT SETTINGS

The cut and the press part can be printed at 0.2 Layer height.

I would advise an overall speed of 40mm p/s.

Other important settings are:

Print thin lines: This would cover tiny holes between 0.4 lines (or if you have the latest Cura version it would not be necessary).

Z seam alignment: random (you do not want the seam all in one place as this might cause defects in the cutter blade.

Combing mode: Not on outer surface - as this would also leave the least defects on the printing surface by limiting traveling.

Print them separately for less artifacts because of traveling.

Fine tune your settings if you want to print them together.

CHRISTMAS SNOWFLAKE - JAM, THUMBPRINT COOKIE CUTTER