cloud box · magnetically stackable

this is a modular design that consists of the boxes themselves, lid, and as options you have feet and inserts. the stacking between the boxes, lid and feet is achieved through the use of 6x3mm magnets. These are affordable and readily available in many stores (i purchased mine from amazon in a pack of 100), and enable the stacking of the components, resulting in a satisfying "thock" sound and smooth action.

You'll need 16 6x3mm magnets to achieve the same result as shown in the pictures and included in the print profile, as well as some drops of super glue to ensure they really stay in their position and don't get pulled away from the slot.

please make sure that you are very mindful of the polarities of the magnet when assembling and gluing in their spots as you want to make sure that each section atracts and not repels the one that will sit above/below

notes

- standard digital file license

- includes 3mf file

- all photos uploaded are of the actual printed model, and are copyright protected

- if you enjoy this model please consider to buy me a coffee · https://www.buymeacoffee.com/h3li0

- commercial licence membership available on my patreon · https://www.patreon.com/h3li0

cloud box · magnetically stackable

two colour plates 0.2mm layer, 2 walls, 15% infill