Design
Concept Alternative mounting system for the filament spool on the right side of the Creality K1 Max printer. The design emphasizes functionality, ease of installation, and full compatibility with the printer’s original structure. No permanent modifications are required, ensuring complete reversibility. The mounting base is secured with screws, while the additional components are assembled and rotate freely around their axis due to diameter differences, allowing smooth movement without compromising stability.

Print Settings
Printer: Creality K1 Max

Print Time: 4 hours

Layer Height: 0.2 mm

Infill: 90%

Material: Hyper PLA, black

Supports: Only used on the main base for internal locking features. Default density, 55° angle.

Adhesion: No brim, raft, or skirt used.

Parts: Printed in a single run with all three assembly components separated.

Assembly

All parts are assembled as shown in the reference images. Screws are used only for mounting the base. No additional adjustments or drilling are required—print the design as-is. Final assembly is completed by inserting each part into its designated position, enabling a quick, functional, and fully reversible installation.

CREALITY K1 MAX SPOOL ROLLER

0.2mm layer, 2 walls, 15% infill