This elegant Grand Piano Box is a decorative and functional 3D print inspired by classic upright pianos. Designed for post-print assembly with print-in-place mechanics, it features:

- Pivoting key cover that opens to reveal the keyboard

- Print-in-place hinged lid, integrated with the brim section for smooth movement

- Separate prop piece included to hold the lid open for display

- Three claw-footed legs for a vintage, sculptural look

- "Eskimo" embossed on the piano top, flanked by leaf motifs on both sides

- Embossed music notes on the lid for added character

- Additional leaf detailing on either side of the keyboard

All components are printed individually and require basic assembly. The lid hinge prints in place with the brim, allowing for functional movement right off the bed. Ideal for storing small items like guitar picks, change, candy, jewelry or displaying as a unique keepsake, this piano box blends mechanical function with ornamental detail.

Print Settings:

Resolution: 0.16-0.2mm
Infil: 18% - Gyroid
Support: Yes, Organic/Tree, Build Plate Only
Outer Wall Speed: 55mm/s
Wall Generator: Arachne
Brim/Skirt: Skirt - 5 loops or Brim - 8mm
Extruder Temp: 220°C
Bed Temp: 65°C
Retraction Distance: 1mm
Retraction Speed: 55mm/s
Z-Hop: Yes
Z-Hop Distance: 1mm
Z-Hop on Layer Change: Yes
Z-Hop Behavior: Swirl

Parts are already orientated for printing.

Assembly:

1. Print Parts using recommended settings or your own slicing profile.

2. Glue Piano Center Body and Lower Body together.

3. Place glue on one side of the front of the center body part for a key guard. Install Guard and allow to dry.

4. Place glue on opposite side of center body. Insert keyboard cover tab into printed hole of installed guard. Place other tab for the keyboard cover into the key guard for the other side and press in place. Allow to dry.

5. Place glue where keyboard goes and press the keyboard part in place holding until glue sets.

6. Flip upside down and put glue in the holes for the feet. Press feet in paying attention the clawed toes making sure they are facing outward. Leave upside down to dry.

7. Put glue in lid brim trench and press into place holding until the glue sets and allow to dry.

Eskimo Grand Piano Box