Design Concept

This design features a foldable mechanism. When needed, the arms extend outward to create a secure cradle for the guitar neck; when not in use, they easily fold back to provide a minimalist appearance.

Tested with a Barcelona LC 3900 CBK Cutaway guitar.

Print Settings

Printer: Tested on Creality CR-10 SE.

Printing Orientation: Print as shown in last figure.(Separations and breakages may occur if the print is not made according to the last figure.)

Wall Count: 4 or more (Essential for structural integrity).

Infill: 40% - 60% .

Material: PLA+, PETG, or ABS. (tested with PLA+)

Supports: Print the arms with supports.

Assembly & Installation

Mounting: Designed for standard wall screws.

Tip: Adding a thin layer of foam etc. between the mount body and the wall is recommended.
Assembly Note: Depending on your printer's calibration and the filament type used, the connecting pins may fit tightly. If the parts do not fit perfectly, you can easily resolve this by lightly sanding the contact surfaces.

Surface Care: We recommend adding a thin layer of TPU or foam on the contact points(with Guitar).

License & Commercial Use

[STL is for personal use only. Do not copy or redistribute.] If you wish to use this design for commercial purposes (selling physical prints), please contact me at Email to obtain a commercial license or to discuss royalty agreements.

Contact & Support

Feel free to contact me for any questions or custom 3D design requests.

Email: secgintech@gmail.com

Guitar Wall Mount / Minimalist