This model is an external spool holder for use with the Creality Hi - CFS overhead mount Ultimate and standard versions.

CFS - Hi overhead mount Standard



CFS - Hi overhead mount Ultimate



This is an optional external spool model for the CFS Hi overhead. It will not fit on the same side of the CFS-Hi overhead mount with either version 1 and 2 of the CFS Buffer holder. It can be installed on the opposite side of the CFS Buffer holder. The following model can be installed on the same side as the CFS Buffer holders:

CFS Buffer compatible external spool

The external spool holder can be mounted on either side of the printer. A left and a right side model are provided (do not mirror as the thread will not work). The right side external spool is for use on the right side of the printer as seen when facing the printer. The left side is for the other side.

The spool holder has a threated adapter that can hold an adapter for any size spool.

Three sizes of spool spindles are included:

Large: 63.5 mm x 70 mm (most plastic spools)

Medium: 50 mm x 70 mm (most cardboard spools)

Small : 36 mm x 57 mm (small diameter spools)

3D PRINTING

IMPORTANT – PRINT SETTINGS

I uploaded a print setting files for all my models. The print settings has the parts positioned for correct printing and with support painted. Use “Tree Manual” as the support setting.

I strongly recommended you use my print setting file. If not, I will not be able to assist you if there is an issue when printing. From experience, many of the issues with printing my models are on account of users not using my print settings.

3D PRINT SETTINGS

I use the following settings and materials to print this model:

Infill % : 15% (no need for more)

Nozzle diameter: 0.4 mm

Layer height: 0.2 mm standard

Material: PLA is recommended as its more rigid. PETG or other filaments may cause the part to deform or may not work with the built-in tolerances. PLA-CF and PETG CF and other materials often print too wide and cause parts not to fit.

Interchangeable external spool holder

0.2mm layer, 2 walls, 15% infill

0.2mm layer, 2 walls, 15% infill