Best material:

PLA+ recommended for strong structural integrity and crisp node connections.

Matte PLA enhances the industrial woven aesthetic.

Resin optional for smaller wearable versions requiring smoother joints and finer detail.

Layer height:

FDM (Creality K1C): 0.12 mm for balanced detail and clean intersections

0.08 mm for higher-quality surface finish

Resin: 0.03–0.05 mm for ultra-smooth node transitions

Supports:

Yes, recommended.

The interwoven lattice structure creates multiple complex overhangs and crossing elements beyond 45°.

Use tree supports, touching build plate only, low density (10–12%).

Carefully avoid placing supports on highly visible outer nodes.

Infill:

100% for wearable strength

20–25% gyroid for larger decorative prints

Walls:

4–5 perimeters to reinforce intersections and improve durability.

Orientation:

Tilt 30–40° to minimize support marks on visible outer lattice and improve bridging between nodes.

Avoid flat orientation to reduce internal support complexity.

Scale Suggestions:

18–22 mm inner diameter → wearable structural ring

60–80 mm → modern geometric sculpture

120 mm → architectural display piece

Interlock Mesh Core Ring – Noah0x03