Nissan 240SX / S15 Silvia Functional Key Holder - Drift Edition
Design Concept
Celebrate the ultimate drift machine with this Nissan 240SX wall-mounted key holder, featuring the legendary S15 Silvia front-end conversion. Meticulously modeled in Fusion 360, this design showcases a custom aero body kit, deep-set intercooler detailing, and aggressive side canards. It is engineered to be a striking piece of JDM functional decor for your garage, office, or entryway.

Key Features
Precision Fusion 360 Engineering: Optimized specifically for FDM printing to ensure that the complex aerodynamic lines and "shark-eye" headlights are crisp and accurate.
Integrated Keyslot Mount: The rear of the model includes a built-in keyslot (keyhole) mechanical mount. This allows the holder to slide securely over a wall-mounted screw for a clean, professional, and completely invisible installation.
Reinforced Dual Hooks: The hooks are integrated into the lower front splitter design, reinforced to easily handle the weight of multiple heavy keyrings for daily use.
Printing & Material Advice
Recommended Material: PETG. To ensure the structural integrity of the aero parts and the mounting system, PETG is highly recommended. As shown in the preview (Grey PETG), it provides the necessary impact resistance and durability for a functional household item.
Layer Height: 0.16mm - 0.2mm for an optimal balance between smooth curves and print speed.
Infill: 20% (Gyroid or Grid) for solid internal strength, especially around the wall-mounting area.
Supports: Minimal supports are recommended for the front splitter overhangs and the internal keyslot cavity.
Assembly Instructions
Print: Use Grey PETG for a professional, metallic automotive look and maximum strength.
Wall Prep: Install a standard screw into your wall with a proper anchor, leaving the screw head protruding approximately 3-5mm.
Mount: Align the integrated keyslot on the back of the 240SX with the screw head and slide it downward until it locks firmly into place.

Nissan 240SX S15 Silvia Key Holder - JDM Drift Style

0.2mm layer, 2 walls, 15% infill

0.20mm layer, 2 walls, 15% infill

0.20mm layer, 2 walls, 15% infill