A comfortable and practical way to improve the grip of your pet's leash, with a special compartment to store treats or dog waste bags. I strongly recommend using tough resin or high-strength filament to print this design due to your pet's pulls.

I hope this design proves useful and makes walking your pets more comfortable and practical. I welcome any suggestions and feedback to improve the design.

___

By purchasing this model, you do not have the right to sell or distribute any digital files or printed models. If you would like to sell the prints, join me on patreon.com/Perfetti to get commercial license and access to exclusive designs.

___

Printer: Creality LD-002R LCD

Resin: Anycubic ABS-like resin

Slicer software: Chitubox basic

Printing parameters:

Layer Height 0.05mm

Bottom Layer Count 7

Exposure Time 7s

Bottom exposure time: 35s

Rest time before lift 1s

Rest time after lift 0s

Rest time after retract 1,5s

Bottom Lift Distance 1,5mm + 4,5mm

Lifting Distance 1,5mm + 4,5mm

Bottom retract distance 5mm + 1mm

Retract distance 5mm + 1mm

Bottom Lift Speed 65mm/min & 150mm/min

Lifting Speed 65 mm/min & 150mm/min

Bottom retract Speed 240mm/min & 150mm/min

Retract speed 240mm/min & 150mm/min

Pet Storage Leash Handle