Phone Stand - Papyrus Scroll: A piece that, in addition to being useful, decorates any corner with an antique touch while not in use. It also provides enough space to write whatever you want on it and give it a unique and personalized touch.

Printing instructions:

Print-in-place, no supports needed. Although supports are not required, you can add them if you find it necessary, inside the folds. In my first print, I placed light supports to test.

___

By purchasing this model, you do not have the right to sell or distribute any digital files or printed models. If you would like to sell the prints, join me on patreon.com/Perfetti to get commercial license and access to exclusive designs.

___

Printer: Anycubic Photon Mono X2

Resin: Jayo ABS-like resin (white)

Slicer software: Chitubox basic

Printing parameters:

Layer Height 0.05mm

Bottom Layer Count 5

Exposure Time 2,6s

Bottom exposure time: 25s

Transition layer count 10

Transition type linear

Light off delay 0,5s

Bottom Lift Distance 3mm + 5mm

Lifting Distance 3mm + 5mm

Bottom Lift Speed 65mm/min & 150mm/min

Lifting Speed 65 mm/min & 150mm/min

Bottom retract Speed 240mm/min & 150mm/min

Retract speed 240mm/min & 150mm/min

Phone stand- papyrus scroll