Thank you all for your support. I'm always happy to hear your opinions and suggestions for new models. So please share them in the comments.

You can offer me a coffee and support my work here >>> https://ko-fi.com/drakeforge3d If you like my work and want to support me, I appreciate any support. The website also includes a commercial license that allows you to sell all my existing models.

Halloween Mansion

This 3D printed model depicts a spooky Halloween mansion, designed with gothic details and eerie charm. The house features tall, pointed roofs, arched windows, and a crooked staircase that gives it a haunted atmosphere. Perfect as a tabletop decoration or as part of a Halloween diorama, the mansion captures the essence of a creepy, abandoned estate. Printed on an FDM 3D printer, it showcases fine details such as shingles, stone foundations, and sinister architecture, making it an ideal piece for collectors or seasonal displays.

Guide

Each of my models is printed 2-3 times before releasing the profile. So if you have a problem with printing:

1. DRY THE FILAMENT

2. CHANGE THE NOZZLE TO A NEW ONE.

Recommendations Guide : In case of a problem with damage to the supports, I recommend reducing the printing speed of the supports by 30-50% and the travel speed to 400mm/s. When removing the supports, I recommend first cutting off the pieces right next to the character, but not removing them, just cutting them off. Remove the remaining larger pieces and only then detach the remaining smaller pieces. This reduces the risk of damaging delicate elements.

Please note that if you use a different filament than the recommended one, the effect may be different from my print. For example, printing in silk PLA will look better but the supports and the print itself will be more brittle and less durable.

Recommendations:

0.08-0.2. In the event of changing the original height, the height of the supports should be changed.

PLA+HS, PLA+, PLA, PLA silk Recommended materials are listed in order from best to good.

Clean the plate thoroughly before printing.

Make sure the filament is dry and free from dirt. This can damage the print or weaken the support

Spooky Halloween Mansion

0.16mm layer, 2 walls, 10% infill