Stackable Twist-Lock Containers – Part 3!

I had a lot of questions about different sizes or more dividers inside the containers. Finally there was a time to sit back to this design and extend the range of available parts. I made additional 35 of them so decided to split in two new uploads.

So what do you get in Part 3? New sizes!

For all who need something taller than 40mm I prepared upper parts with the sizes of 50 and 60mm and the bottoms in 50,60 and 100mm. All of them with 2, 3, 4 and no dividers inside.

Stackable Twist Lock Containers

Practical storage solution for your household or workshop.
Store your screws, nuts, washers, bearings, electronic components, magnets, switches or connectors. Any small and loose items you like!Originally designed to use in the workshop during power tools reparation process to keep screws and small parts organized. Sometimes it takes days or weeks to get replacement parts and in the meantime you may forget what kind of screw goes where when you keep everything together. This simple storage containers solve this problem.
Housing screws – first container. Two lengths? Split version. Add another container, put electronics screws and parts. Another one - gear housing screws. Etc, etc. When you finished just add the lid. Put container with the rest of the parts so no screw will be missing. Time to put your tool back together? Just use screws in reverse order :)
This container may also help during initial part segregation when building RC models or any DIY project with lots of small parts.

About the model:
Container diameter – 73mm outside, 70mm inside. Storage height 20, 30 and 40mm.

Mix with the containers available in original design and in part 2:)

Original design

https://www.crealitycloud.com/model-detail/stackable-twist-lock-containers?source=22

Stackable Twost-Lock Containers - Part 2

https://www.crealitycloud.com/model-detail/stackable-twist-lock-containers-part-2?source=22

How to print this models.

I see plenty of print profiles where creator either don’t understand how multicolor works or they just don’t care about filament waste and print time. We do :)
If you want your containers with color accent like mine, please don’t mix bottoms and upper parts on one print plate. That way, instead of 3 color changes you will get 20. Also print them with just one wall instead of 2. 10% infill is also enough. To get nice, smooth surface hide the seam on vertical lines outside the containers using seem painting.
I added two print profiles in download section – original Bambu one and something new for me – print profile for Creality printers! I’m very happy that with new Creality Print 7.0 I can directly upload my projects from Bambu Studio and get all setting, including coloring and seem painting without correcting most important parts. Thank you Creality! :)

Print it in standard PLA or PETG - do not use silk PLA as it may slightly change model dimensions and make this containers to not fit together.

If you like the model and you want to give it thumbs up, please also consider downloading it. It cost you just one additional click and it’s very important to me. Also check my other models, maybe you will find something interesting :) Thank you!

Happy printing! :)

Stackable Twist-Lock Containers - Part 3

0.2mm layer, 2 walls, 15% infill