The design is based and thought for a daily use in the Fiber Optics Branch.

When you are using a Splice Device you need a Cleaver, but when is a small place, like a mini Server Room, where can you put it if you don't have your table? Because the Servers are almost every time a metal one, this comes in handy.

A simple Magnet Holder for the Cleaver or Isopropanol Spray/bottle for the Metal Surface or Walls, with 2 pieces 20mm inside and 2 pieces 16 mm magnets(Magnet not included, I've used these from Amazon; https://amzn.eu/d/hFHTuI2 ).

It´s designed for future uses and modular addons.

3D printed with PLA and/or PETG (PETG is recommended because of the heat resistant).

Settings i´ve used without problems with my Creality S1 Pro:

❱ Filament: Esun PLA Black / Esun PETG Black

❱ Infill: 20 % Cubic

❱ Layer Height: 0.28mm

❱ Walls: 4

❱ Nozzle Size: 0.4mm

❱ Support Structure: None necessary

❱ Brim: None needed, but if you have adhesion problems please use brim.

❱ Print time: - 4h 6 min (PLA / PETG with Support)

❱ Print Speed: 70 mm/s (50 mm/s for the walls)

Support LWL Cleaver or Coffee Cup