Ever had trouble choosing which infill to use in CrealityPrint?

This comparison table (or test model) was created to demonstrate each of the 22 currently available infill patterns, helping you balance strength, speed, and filament savings.

🔍 What's included in this guide?

I've mapped out every single infill algorithm in the latest version of Bambu Studio.

From the extreme speed of Lightning to the isotropic strength of Gyroid, to the latest innovations:

Grid

Lines

Triangles

Tri-hexagon

Cubic

Adaptive Cubic

Support Cubic

Gyroid

Honeycomb

3D Honeycomb

Concentric

ZigZag

Cross

Cross Curve

Octagram Spiral

Lightning

CrossHatch (High speed and stability)

CrossZag

LockedZag (Optimized for aesthetic walls)

Lattice 2D

Rectilinear

Aligned Rectilinear

💡 Which one to choose?

For maximum strength: Gyroid (isotropic) or Cubic.

For pure speed: Grid, Lines, or the new CrossHatch.

To save material: Lightning (great for aesthetic models/statues).

To avoid vibrations/noise: Gyroid or CrossHatch (they don't cross on the same layer).

For flexible parts (TPU): Concentric or Cross.

🛠️ Printing Instructions

Material: Works with any filament (PLA/PETG recommended for visual clarity).

Top Layers: I set the profile to remove the top layers (0 Top Layers) so I can touch and see the internal structure.

Note: Use the included .3mf file to have all 22 blocks configured with their respective patterns!

Was this helpful? Leave a ❤️ and upload a photo of your print! You'll help other makers choose the perfect infill.

The Ultimate Infill Guide: All 22 Patterns!

0.2mm layer, 2 walls, 15% infill