The use of this box is in the name..
3 in. by 3 in. by 3 in. container. Length x Width x Height
THIS CONTAINER IS AROUND 3.05x3.05x3.05 INCHES!
PRINT THIS WITH 1 WALL AND LOW INFILL (UNDER 5%).
IT IS UNNECESSARY TO PRINT WITH MORE THAN ONE WALL AND MORE THAN 5% INFILL UNLESS YOU ARE WATERPROOFING THIS CONTAINER, AS IT IS ALREADY RIGID ENOUGH FOR MOST USE CASES. IF YOU DO NOT CHANGE THE SETTINGS, YOU WILL BE WASTING UP TO 120G+ FILAMENT

Bed temperature should be around 65c considering the contact area under the object

Actual storage inside may vary depending if your printer is calibrated correctly. For me, it was 3x2.96 in inside volume (Not counting height)

You could print dividers to help store things. You need to make them yourself though

This print will retain water inside of the walls. Be very careful of what you do with this.

EVERYTHING BELOW WAS GENERATED BY AI
Design Concept

The design of this 3x3x3 inch storage container emphasizes simplicity and functionality, offering a basic cube structure that can store various small items neatly.

Purpose

Ideal for organizing small items such as desk supplies, small tools, or spare parts. Its minimalist design makes it suitable for both personal and professional spaces.

Printing Suggestions

Use PLA or PETG material for durability. A layer height of 0.2mm and 20% infill should be sufficient for sturdy walls.

Assembly Instructions

No assembly is required for this solid storage container. Simply print and use as needed.

Actual storage inside may vary depending if your printer is calibrated correctly. For me, it was 3x2.96 in inside volume (Not counting height)

You could print dividers to help store things. You need to make them yourself thoughThis print will retain water inside of the walls. Be very careful of what you do with this.EVERYTHING BELOW WAS GENERATED BY AIDesign Concept

Purpose

Printing Suggestions

Assembly Instructions

You could print dividers to help store things. You need to make them yourself though

This print will retain water inside of the walls. Be very careful of what you do with this.

EVERYTHING BELOW WAS GENERATED BY AI
Design Concept

3x3x3 inch Solid Storage Container

0.2mm layer, 1 walls, 3% infill

0.2mm layer, 2 walls, 15% infill