A simple polygon bin with a matching polygon lid featuring a repeating polygon pattern! I created this design to test printing large, straight shapes on my Creality K2, and I now use it to store purged filament. Please note, the bin alone measures 330×330×330 mm, so a printer with a large build volume is required. If you’d like to scale this model for a smaller printer, check out the Customisation section below. There, you can modify the model directly in your web browser to increase the wall thickness and scale the design down.

Dimensions

- Bin Total: 330 x 330 x 330mm

- Lid Total: 330 x 330 x 83mm

Customization

The model was created in TinkerCAD (link to the project: https://www.tinkercad.com/things/hIOoPmcXiWr-chuffnuggets-polygon-printer-bin/), and you’re welcome to copy and modify the source file to suit your needs. All the development steps are preserved within the design, so simply ungroup the model until you find the component you wish to adjust.

My Print Settings

- Wall Layers: 4

- Infill: 15%

- Supports: Light Tree Supports on lid only. No supports are needed for the bin itself.

- Material: Creality Hyper PLA

- Colours: White for the container, red for the lid, with a white handle, but any colours or a single colour should work fine.

- Printer: Creality K2 Plus

Chuffnugget's Polygon Printer Bin

0.2mm layer, 4 walls, 15% infill, lid: slim organic supports

0.2mm layer, 2 walls, 15% infill