This is the updated version 2.1 of the Dummy 13 Weapons Pack. It includes a new pump action shotgun and fully redesigned katanas, handguns, holsters as well as several optimizations to the frame to help with adhesion issues that were reported on the v2.0 mode. This model is made for the dummy 13 .

Clean the build plate with dish soap (I use Dawn which seems to work very well for this).

Textured PEI has generally better adhesion performance than any smooth plate, so try using a textured plate if you have issues.

If you have an open frame printer (like the A1 or A1 mini), try to place your printer so it is not in a drafty area, or under or near an HVAC return, if possible. Temperature swings caused by drafts can case many issues, including adhesion problems.

Use glue if your build plate supports it.

You can also add a brim or paint on "brim (mouse) ears”, to assist with adhesion in the slicer.

their Stuff:

If you like this design and want to check out some more of mystoopidstuff here is a list of Dummy 13 Weapons and Adventure Packs:

https://**********.com/en/models/221616#profileId-239975 - Star Wars/Sci-Fi Inspired Rifles and Pistols

https://**********.com/en/models/885809#profileId-840955 - Skis, Ice Axe and Backpack for Winter Adventure Sports

https://**********.com/en/models/206949#profileId-240171 - Space drill, pick, geologic collection scooper, camera and other Astronaut stuff

https://**********.com/en/models/888535 - You read that right, even Dummy 13 likes to grill up some burgers now and then

https://**********.com/en/models/774821#profileId-711256 - Traffic cones, a bottle jack and other tools

Shout out to the mystoopidstuff the creator he is on ********** https://**********.com/en/@mystoopidstuff. and he made all this and a bi Big thanks to Lucky 13 Toys (Soozafone) for sharing the awesome Dummy 13 (v1.0) who made all of this possible

Dummy 13 weapons pack

0.2mm layer, 2 walls, 15% infill