Original By: Jack_R1 - https://www.***********.com/jack_r1/designs

From: https://www.***********.com/thing:6591996

Summary:

I have my printer on right side of my desk, facing front. The original Nebula pad mount took up a bit of space on my workspace (where I place my coffee XD), so I looked for a different mount so the nebula pad give me extra space. (Please be careful with your hand movements and coffee cups XD)

Found the original model by Jack_R1, but his mount makes the cable very tight and bent, so I thought about running the cable through the middle of the pad and the mount, leaving the cable in a more natural position. (don't like the idea of a cable bending too much and failing in future).

I also noticed how the clip on the Tool Holder was thick and how some accessories (like bed Nebula camera mount) collided with the bin box and tool box, so I trimmed them down a bit, giving it more clearance for various types of accessories.

The hole on the Mini Double Open End Wrench has been moved 6mm so that it would not get in the way of those using the Single Camera Mount

I also enlarged the USB port a bit, it fits a Kingston DataTraveler Exodia (classic one) without any problems.

he Kingston Exodia USB I used as a reference measures 67 x 21 x 10.2 mm or 2.64 x 0.83 x 0.40 inch

Print Settings

Printer: Creality Ender 3 v3 KE

Resolution: Standard 0.2

Infill: Gyroid - 15% (or whatever you feel good)

Supports: Not necessary

Raft: Not necessary

Walls: Printed with 3, maybe 2 goes well too.

Material: Toolbox + bin box Printed with Gray Generic PETG, Nebula holder with Generic Black PLA. (PETG not necessary, I wanted gray for better visualization of tools, and I only had PETG XD)

Assembly instructions on images

...Finally, I can place my big coffee cup on it's original site, away from my hands and the Nebula pad XD

Ender 3 v3 SE/KE Right Side Setup (Pad/Bin Box/tools) Remix

0.2mm layer, 2 walls, 15% infill

원래의