Credit:

Raveniarty

@Raveniarty_1161140

https://www.printables.com/model/786477-ender-3-v3-ke-creality-digital-side-spool-mount

Description

Ender 3 V3 KE Creality Digital Side Spool Mount. To reduce vibration on the frame they tried the side spool holder, but they weren't satisfied with the look and also it felt weak. They wanted to have something similar to the Ender 3 V3 side spool holder, and also being able to read the Creality Digital Spool measured weight easily.

By combining both design they were able to create what they wanted. It feels much more stronger, it helps with the flow of the filament and looks great.

The spool holder work with the mod to rotate the screen, but you will need the long material rack from the Creality Digital Spool holder because the short one (that came with the KE printer) is too much. The short one may work if your screen is vertically (stock position) positioned, but I didn't tested it. Your comments are welcome to improve the design.

Additional materials

1x M5x20 bolt

2x M5x16 bolt

1x M5 washer

3x M5 nut

Material rack

Note: use the one that came with the Digital Spool holder, the shorter one is too short if you have the screen horizontally like me

Creality Spool holder

Installation

Assemble the Material rack to the printed holder using the M5 bolts, washer and nuts. Note: strongly recommended to that before installing the printed holder to the printer frame because it's easier

Clip/press in place the printed holder to the printer frame

Install the Creality Digital Spool holder

Print instructions

Infill: 15%

Orientation: Vertically

Supports: With tree support

Side Spool Mount for KE

0.2mm layer, 2 walls, 15% infill