-----------------------------------------------------------------------------------------------------

12v Camper Conversion Extractor Fan

-----------------------------------------------------------------------------------------------------

Total required filament - 625g.

Recommended type - PETG or Stronger. DO NOT USE PLA

AMS required - No.

Size when printed - Depends on Model Chosen. Cut outs provided,

Notes - None.

-----------------------------------------------------------------------------------------------------

Additional needs/parts:

PWM Controller 4 PIN

Rocker Switch 20MM

Filter COOKER HOOD UNIVERSAL

PWM Fan 120MM

M3 Bolts VARIOUS SIZES

M3 Heated Inserts 5MM

10mm x 1m STRONG magnets

-----------------------------------------------------------------------------------------------------

Assembly Instructions:

Use cut out to create roof hole. Mount with heated inserts and m3 bolts and insert and wire PWM fan and 12v rocker switch to fuse board. If you are not confident seek professional electrical help.

See Image for order of assembly.

12v Camper Conversion Extractor Fan - Easy Fit

0.2mm layer, 2 walls, 15% infill