1980 Chevrolet C10 / Silverado "Squarebody" Functional Key Holder
Design Concept
Capture the peak era of vintage American trucks with this highly detailed 1980 Chevrolet Silverado / C10 wall-mounted key holder. Meticulously modeled in Fusion 360, this design represents the legendary "Squarebody" generation. It accurately replicates the iconic rectangular grid front fascia, clean bumper lines, and realistic off-road tire tread textures emerging from the fenders. A perfect piece of functional automotive decor for workshops, garages, or any classic truck enthusiast's home.

Key Features
Precision Fusion 360 Engineering: Specially optimized for FDM 3D printing to ensure that the fine grid pattern of the 1980 front grille and the rugged tire details print crisply.
Integrated Keyslot Mount: The back of the model features a built-in keyslot (keyhole) mechanical mounting system. This allows the heavy-duty truck plate to slide securely over wall-mounted screws for a completely flush, clean, and invisible installation.
Reinforced Truck-Strength Hooks: Integrated seamlessly into the classic front bumper design, these hooks are reinforced to easily hold the daily weight of multiple heavy keyrings, lanyards, or small tools.
Printing & Material Advice
Recommended Material: Grey PETG. Given the functional purpose of the hooks and the mechanical mount, PETG is highly recommended. As shown in the preview, Grey PETG delivers exceptional layer strength, impact resistance, and a solid metallic finish right off the build plate.
Layer Height: 0.16mm - 0.2mm to preserve the intricate details of the front grille and tire treads.
Infill: 20% to 25% (Gyroid or Grid) for solid internal structural reinforcement around the mounting slots.
Supports: Minimal supports are recommended under the front bumper overhangs and inside the internal keyslot cavity.
Assembly Instructions
Print: Use Grey PETG for maximum mechanical strength and premium durability.
Wall Prep: Drive standard screws with proper wall anchors into your wall, leaving the screw heads protruding roughly 3-5mm.
Mount: Align the integrated keyslots on the back of the truck plate with the screws and slide it downward until it locks firmly in place.

1980 Chevrolet C10 Silverado Key Holder

0.2mm layer, 2 walls, 15% infill