super cool frutiger metro style hueforge I meshed and sliced for your ease of use, 4 colors needed red border is the same red as second layer. heres the description!!

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 200x134.69mm in size

You may print at higher layer heights below the Base Thickness of 0.48mm

The Max allowed Thickness is 2.24mm and the Actual Thickness is 2.24mm

#080a0d PLA PolyLite Black Transmission Distance: 0.3

#aa0000 PLA Polylite Christmas Red Transmission Distance: 1.4

#ff511e PLA Copymaster 3D TURBO Orange Transmission Distance: 7.3

#e2dedb PLA PolyLite White Transmission Distance: 5

#de1619 PLA PolyTerra Lava Red Transmission Distance: 1

This print uses 5 unique filaments

Swap Instructions:

Start with Black

At layer #7 (0.64mm) swap to Christmas Red

At layer #12 (1.04mm) swap to Orange

Border Only Colors from here until the end.

At layer #15 (1.28mm) swap to White

This slider is set higher than the mesh depth. It is not affecting your final mesh. Consider removing it.

At layer #30 (2.48mm) swap to Lava Red for the rest.

2010s style red 4 color frutiger metro hueforge!!!

0.08mm layer, 2 walls, 100% infill