🔥 3D Printer Enclosure Heater – FDM & Resin

This project is a compact heating module designed for active temperature control of 3D printer enclosures, compatible with both FDM and resin printers.

It is ideal for improving:

bed adhesion

warping reduction

thermal stability during long prints

Especially suitable for engineering materials and closed or DIY enclosures.

The heater housing is designed for FDM printing in ASA, chosen for its high heat resistance, dimensional stability, and long-term durability.

🧩 Key Features

Compatible with FDM and resin 3D printers

PTC heating element – 220V 150W

👉 https://it.aliexpress.com/item/1005006443582100.html

Supports XH-W3001 temperature controller

👉 https://it.aliexpress.com/item/1005006605050647.html

7515 centrifugal fan – 12V for uniform heat distribution

👉 https://it.aliexpress.com/item/1005004832141450.html

220V → 12V transformer to power the fan

220V power connector

👉 https://it.aliexpress.com/item/1005008021525760.html

ON/OFF switch

👉 https://it.aliexpress.com/item/1005008400712775.html

Fuse holder with protective fuse

Compact, robust, and easy-to-install design

Ideal for enclosed printers and DIY enclosures

🧱 Recommended Material

ASA (strongly recommended)

Alternatives: ABS or PC (with proper precautions)

Suggested Print Settings

Walls: ≥ 4 perimeters

Infill: 30–40%

Layer height: 0.2 mm

⚠️ Important Notes

This is a DIY project and requires basic electronics knowledge

When powered at 220V, always follow proper safety precautions

The use of a thermal safety fuse is strongly recommended

Always test the system outside the printer before real operation

3D Printer Enclosure Heater – FDM & Resin

0.24mm layer, 4 walls, 15% infill

0.2mm layer, 2 walls, 15% infill