A Like, Rating or Comment is a huge help and I really appreciate all of it. 🙏

==========================================================

DnD TTRPG Zombie Giant Eagle Miniature

A ghastly, enormous bird of prey, the zombie giant eagle soars on tattered, decaying wings, its noble form corrupted into a hunger-driven nightmare of rot and feather. Its eyes burn with a malevolent, undead light as it descends from the sky, a terrifying omen of death and blight.

Nozzle: 0.4

Layer Height: 0.08mm

Post Processing: Use thin tweezers to Pull supports down and out after cutting from the brim/base first. Be careful around the claws and ribs as they're thinner. These just need extra care and patience. Work from Bottom to Top. Some smoothing (sanding etc) after the supports are removed, may be required.

Assembly: This model comes in 2 halves that need to be glued together. Glue Part A to Part B with glue like Crazy Glue.

Housekeeping: Make sure your printer is Calibrated, Build Plate washed and Filament Dried so the supports have the best adhesion possible. Let the miniature fully cool down before removing supports.

Looking for the regular Giant Eagle? It's here https://**********.com/en/models/1457998-dnd-ttrpg-giant-eagle-miniature#profileId-1519817

DnD TTRPG Zombie Giant Eagle Miniature

0.4 nozzle 0.08mm layer, 2 walls, 15% infill

0.2mm layer, 2 walls, 15% infill