The use of this box is in the name. It contains 4x4x4 inch things inside of it.
THIS CONTAINER IS AROUND 4.07x4.1x4.1 INCHES PRINT!

PRINT THIS WITH 1 WALL AND LOW INFILL (UNDER 5%).
IT IS UNNECESSARY TO PRINT WITH MORE THAN ONE WALL AND MORE THAN 5% INFILL UNLESS YOU ARE ATTEMPTING TO MAKE THIS BOX WATERPROOF, AS IT IS ALREADY RIGID ENOUGH FOR MOST USE CASES. IF YOU DO NOT CHANGE THE SETTINGS, YOU WILL BE WASTING UP TO 200G+ FILAMENT

Bed temperature should be around 65c considering the contact area under the object.
DO NOT PRINT WITH A BRIM, AS IT WILL RUIN THE QUALITY! THE BOTTOM WILL NOT FEEL SMOOTH IF YOU DO THAT!

Actual storage inside may vary depending if your printer is calibrated correctly. For me, it was 3.998x3.997 in inside volume (Not counting height)
This print will retain water inside of the walls. Be very careful of what you do with this.

You could print dividers to help store things. You need to make them yourself, though

EVERYTHING BELOW WAS GENERATED BY CC AI
Design Concept

This storage container features a minimalist design, making it ideal for organizing various items on a desk or shelf. Its cube structure is simple yet functional.

Usage

Perfect for storing small household items, stationery, or craft materials. Its compact size allows it to fit easily in small spaces, providing efficient organization.

Printing Suggestions

Use PLA or PETG for sturdy and reliable results. A layer height of 0.2 or 0.16 mm is recommended to strike a balance between detail and print time. No supports are needed.

Assembly Instructions

The storage container is a single-piece print with no assembly required. Simply ensure it is printed level and let it cool completely before using.

4x4x4 inch Solid Storage Container

0.2mm layer, 1 walls, 3% infill (RECOMMENDED)

0.2mm layer, 2 walls, 15% infill