Hi friends, for the release of the new series on Prime inspired by Fallout, we decided to create a design series inspired by the famous video game of which we are also big fans.

The first 3D model we wanted to create is the Nuka Cola blaster, 3D printable in FDM.

It is made up of various parts, to be printed separately and subsequently assembled:

1.The central body, with the writing nuka cola, has the various spaces where the parts can be inserted. We advise you to print it straight on the surface.

2.The handle.

3.The three discs to be inserted into the main pin.

4.The main pin which must be inserted into the appropriate hole located in the central body.

5.The rear pin which inserted into the large hole located in the rear part of the central body.

We have left the right tolerance between the parts so that they fit together but in any case we always recommend using a little glue to fix everything firmly.

If the assembly instructions are unclear, you can find a video tutorial on our Shack3d_print Instagram page.

We printed everything with our bambulab p1s

with PLA filament, we then painted all the parts in the typical colours.

Hope you like it.

As always we thank you for the support you give us, if you like our designs follow us and support us also on our social pages (Instagram and tiktok, X) Shack3d_print.

We will be happy to see the result of your prints, share the photos with us by tagging us on our social pages, don't be shy.

Thank you very much.

3D PRINTING SETTINGS

Printed with bambulab p1s

Filament: pla

Temp: 220°C

INFILL: 15%

Support: yes

Layer height: 0.2

Nozzle: 0.4

Top/Bottom: 3

Speed: Standard of Bambustudio

Nuka Cola Blaster- Fallout