Deck box based on an artifact's own design. This box is designed to store and protect decks of the game "Magic the gathering". Also works for Pokemon TCG and YuGiOh.

The deckbox is divided in 2 sections:

-Main area: Designed to store more than 120 sleeved cards.

-Gates: You can choose between 6 different designs to print the 4 doors.

- Normal gate

- Dice gate: This gate come with an accessory to store 3 dices.

- Counter gate: This gate come with an accessory to store counters.

- Life counter gate: This gate come with a life counter.

- Token gate: This gate come with an accessory to store tokens.

- Stand gate: This gate come with a stand for the commander.

TOP: There are two options for the top.

- Magnet top: Designed to add magnets with a diameter of 10 mm and a thickness of 2 mm

- Normal top: Designed to fit directly into the base

The inner hole of the hinge has a diameter of 2mm. It is recommended to use 1.4-1.5mm wire due to printer tolerance.

Important

-It is necessary to put supports on the gates to achieve a better finish in the details.

-It is recommended to place supports on all four sides of the deck box to achieve a better finish in the details.

-Each accessory is in a different stl file than the doors.

-The base decorations must be glued.

If you find any problem do not hesitate to contact me.

Artifact Deck Box