>> 模型介绍 | Model Introduction >>>>>>>>

昨天收到指示，家里的领导想要一个收纳耳钉耳环的盒子，还要带个盖子。好吧，那就简单做一个哈。

Yesterday, I received instructions from the household leader that she wants a box for storing earrings, one that comes with a lid. Well, it seems straightforward enough; I'll just make a simple one. 昨天，我接到一家之主的指示，她想要一个放耳环的盒子，一个有盖子的盒子。看起来很简单；我只做一个简单的。

物件整体 Overall Design of the Object: X:195mm; Y:91.3mm; Z:66.1mm.物体总体设计：X:195mm；Y: 91.3毫米;Z: 66.1毫米。

>> 打印配置 | Print Settings >>>>>>>>

（仅参考，可自定义）

(Referential, Customizable as Needed) （参考，可根据需要定制）

耗材 Filament：PLA

填充 Infill：15%

填充图案 Infill Pattern：网格 Grid

支撑 Support：不需要 Not Required

Brim/Raft: NONE 边缘/筏:没有

>> 组装说明 | Assembly Instructions >>>>>>>>

即打即用，简单组装。

Ready to use upon installation; simple assembly required. 安装后即可使用；需要简单的组装。

如果插销不好打印可用M3*55mm螺丝替代。

If the pin is difficult to print, you can use an M3 x 55mm screw as a substitute. 如果大头针难以打印，可以使用M3 × 55mm螺钉代替。

>> 其他说明 | Additional Notes >>>>>>>>

1. 模型使用 Blender 4.2.5LTS制作。

2. 可根据协议 CC BY-NC-SA 4.0 自行修改为所需样式使用。

3. 无论如何，遇见是缘分，能用是巧合，留个言点个赞，关注收藏一起浪。

1. The model was created using Blender 4.2.5 LTS. 1. 模型是使用Blender 4.2.5 LTS创建的。

2. You are free to modify it as needed to suit your desired style under the terms of the CC BY-NC-SA 4.0 license. 2. 在CC BY-NC-SA 4.0许可的条款下，您可以根据需要自由修改它，以适应您想要的风格。

3. Anyway, meeting is fate, being able to use it is coincidence. Leave a comment, give a like, follow and save, and let's ride this wave together. 3. 总之，遇见是缘分，能够利用是巧合。留下评论，点赞，关注并保存，让我们一起驾驭这股浪潮。

>> 声明 | Statement >>>>>>>>

由于个人时间和精力有限，本人仅通过个人注册的平台和账号以及个人拥有的域名（PoweredBy.CN）发布模型相关信息。其他非个人注册、授权的平台和账号发布涉及到本人制作的模型图纸均和本人无关且无任何利益关联。本人在互联网上一直秉承着“自由分享，免费共享”的理念，对已公开发布的模型图纸不会以任何理由限制下载（包含但不限于收费制、会员制、积分制等限制），请注意甄别！

欢迎您通过点赞、关注、收藏的方式表达您对模型的认可和喜爱，同时也感谢您对模型的点评。

您若同意并遵循知识共享许可协议“CC BY-NC-SA 4.0”，本人欢迎您对模型页面进行任何形式的站外分享，也非常赞同和认可您对模型进行升级改造后的再分享行为。

Due to limited personal time and energy, I only release information regarding my models through platforms and accounts registered under my personal name, as well as the domain I own (PoweredBy.CN). Any platforms or accounts not registered or authorized by me that claim to feature my model blueprints have no relation to me and involve no financial interests. I have always adhered to the philosophy of "free sharing and open access" on the internet. For model blueprints I have publicly released, I will never impose any download restrictions (including but not limited to paid access, membership systems, or points-based requirements). Please exercise caution in distinguishing between genuine and unauthorized content! 由于个人时间和精力有限，我只通过以我个人名义注册的平台和账号，以及我拥有的域名（PoweredBy.CN）发布我的模特信息。任何未经我注册或授权的平台或账户声称具有我的模型蓝图，与我无关，也不涉及任何经济利益。我一直坚持“免费分享，开放获取”的互联网理念。对于我公开发布的模型蓝图，我永远不会施加任何下载限制（包括但不限于付费访问、会员系统或基于积分的要求）。请谨慎区分正版和未经授权的内容！

You are welcome to express your appreciation through likes, follows, and collections. I also sincerely appreciate any feedback or comments you may provide regarding the models. 欢迎您通过点赞、关注和收藏来表达您的感激之情。我也真诚地感谢您提供的关于模型的任何反馈或意见。

Provided that you agree to and comply with the Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License (CC BY-NC-SA 4.0), I warmly welcome you to share the model pages externally in any form. Additionally, I fully support and endorse the act of sharing the models after they have been modified or enhanced.只要您同意并遵守知识共享署名-非商业用途-相同方式共享4.0国际许可协议（CC BY-NC-SA 4.0），我热烈欢迎您以任何形式对外分享模型页面。此外，我完全支持和赞同在模型被修改或增强后共享模型的行为。

饰品盒子 | Accessories Storage Box

0.2mm layer, 2 walls, 15% infill

0.2mm layer, 2 walls, 15% infill

0.2mm layer, 2 walls, 15% infill