Updating the shelving in the garage with spur and bracket type shelving, took the opportunity to create some holders.

Bluetooth receiver:

Ordered from Temu https://share.temu.com/hbZdgF3AEYA and was fixed behind the speaker, meaning I needed to drag the speaker out to turn the adapter on/off/charge. Created the holder that allow the adapter to sit on the shelving with a lead to the speaker. Hole in the bottom of the holder to allow the adapter to be on charge while in use.

Light holder:

Having used LAP lights in the garage https://www.screwfix.com/p/lap-single-4ft-led-batten-22w-2430lm-220-240v/356pp I wanted something similar below the shelving and above the desk. I created a simple adapter that takes the sprung holders for the lights and allows them to be attached to the shelving uprights. Please make sure you are happy with the fixings before using them in your environment.

Phone holder:

Now I was getting into the swing of things, a phone holder was the obvious next step as I was typically leaving it on a shelf. Fine most of the time, just difficult to see who's calling or messaging you. Simple holder to allow the phone to present at a better angle.

Small boxes:

When taking things apart I typically need somewhere to put the items that have been removed. I have a few metallic bowls I use for this, or some old kitchen trays. Thought that while I was doing the rest, I may as well take something akin to a Gridfinity box and add a holder to the bracket.

Accessory holders for Spur bracket (phone, BT, light, boxes)

0.2mm layer, 3 walls, 15% infill