Simple spaceship UFO, to be used as a decoration item, or as an incense cascade.

No supports required

MATERIAL:

- do not use PLA, it will not hold the heat

- I did not test in ABS or PETG (I believe PETG will work well)

- I recommend resin, at least for base and top, which are the parts that are more affected by the heat

ASSEMBLY:

Easy to assembly

Glue the 04 legs, and the rest you just place in right positions, no need to glue.

If you prefer, you can glue the base part aswell, but its up to you.

Both top parts should not be glued

The base bowl is optional

-Size Pre-set - Ship 100mm - base bowl is a bit bigger

Remember to resize it as you need,you can resize as you prefer and as fits your needs.

No support required

I used this settings printing in PLA, but as I mentioned, it didnt hold the heat.

I'm not sure about settings for other materials, but here is the one I used if you want print only for decor:

-Dynamic Quality: 0.20mm

-Printing Temperature: 220 - it was V-Silk

-Build Plate Temperature: 70

-Speed: 35 mm/s

-Build Plate Adhesion Type: None

But feel free to change and use the settings you prefer.

Didn't test it on a resin printer, or in ABS/PETG.

Other printers will use different settings, so follow what you are used to, just be aware that the higher the resolution, better the details.

Alien UFO Incense Cascade - Spaceship Decoration