Hey Hey Hey, I an going to upload both STL files for you guys. One is printed all in one piece. The other is separated as it printed best for me.

Model Description

Bring home the female counterpart to Experiment 626 with this adorable 3D printable model of Experiment 624, or "Angel." Known for her unique sonic song, this model captures her distinct look with her large ears, sweet expression, and characteristic twin tails. This design is perfect for fans of Lilo & Stitch and is optimized for filament (FDM) 3D printing.

The model is offered in two variants to suit your preference: a single-piece print for quick results, and an assembly kit for multi-color projects or increased detail on the delicate tails.

General Recommended FDM Print Settings

These settings apply to both model variants and are optimized for PLA filament.

Setting

Recommendation

Notes

Material

PLA (or PETG for durability)

Use a clean, dry filament for best results.

Nozzle Diameter

0.4

Standard size.

Layer Height

0.12 - 0.16

Use 0.12for smoother aesthetics,

0.16 for faster printing.

Infill

10% - 15%

(Cubic/Grid)

Sufficient for stability without wasting material.

Perimeters/Walls

2-3

Ensures smooth exterior and good structural integrity.

Print Speed

40-60mm/s

Keep speed moderate for optimal detail and adhesion.

Bed Adhesion

Skirt (3-5 lines) or Brim (if needed)

Use a brim only if you experience corner lifting.

Supports

Mandatory (See Variant Specifics)

Must use tree supports for organic shapes.

Variant A: Print-in-Place (PiP) / Single-Piece Body

This variant consists of a single file where the main body, head, and ears are one continuous piece. The tails are included as separate files for optimal printing, but the main body is 'PiP'.

Setting

Recommendation

Notes

Supports

Tree Supports Recommended

Critical for the underside of the chin, ears, and any minor overhangs on the body. Set overhang angle to 30

or higher.

Orientation

Print flat on the base (feet)

Standard orientation for best stability.

Tails

Print tails separately (flat on the bed)

No supports needed for the tails when oriented flat.

Assembly

None (Tails optional)

Simply attach the tails using glue (CA or plastic cement) into the provided slots after the print is complete.

Variant B: Assembly Kit (Multi-Part for Detail)

This variant provides the model in three distinct parts: the Main Body/Head, Left Tail, and Right Tail. This is ideal for printing the tails with higher strength settings or using a different color/material.

Setting

Recommendation

Notes

Parts to Print

1. Main Body/Head, 2. Left Tail, 3. Right Tail

Check file names for "Body" and "Tail" identifiers.

Body Supports

Tree Supports Recommended

Required for the ears and chin area.

Tail Supports

None

Print the tails flat on the build plate for easy, support-free printing.

Post-Processing

Minor cleanup of support remnants on the body.

Assembly

Required

Use a strong adhesive (CA glue recommended) to attach the two tails into the recessed slots on the back of the body. Test fit before gluing.

Display Tips

Color Matching: Use a smooth, light pink filament for the most accurate character representation.

Sealing: For a glossy finish, you can coat the final print with a clear, non-toxic varnish or resin.

Angel Stitch

0.32mm layer, 3 walls, 9% infill

0.2mm layer, 2 walls, 15% infill