FINALLY...!

Resin tray (almost :-) AUTOMATIC WASHING...

hi, guys!

it's a cool tool for Anycubic Wash & Cure 3 PLUS, with the aim of support Anycubic Photon X2 resin tray upright, in the alcol (I use 1-propanol, really better) tank, without its basket, so letting the washing machine fully self-clean the dirty and sticky tray, a dream for me... ;-D

my project is self-explanatory, only I had to cut central part in two pieces for my K1 bed measures, but it's also easier to print.

you have to glue the central trusses together, and put M3 brass thread knurled nuts in both braces holes and assemble it's very easy.

use appropriate M3 screws length, varying from 10 to 20mm, no matter exact lenght 'cause holes are passthrough, and accomodate also if are a bit longer. otherwise you can also use a longer screw passthrough all support and a bolt.

support measures are made to perfect fit Anycubic Wash & Cure 3 PLUS, but I send also Inventor original files if you want to modify to fit other washer machines.

I think that this support will help you for 80% of dirty and annoying resin clean operations, (IMO) and clean the resin tank perfectly and effortless.

hope you enjoy it.

;-Dan from Italy

____________________________________________________________________________

Print Settings:

Printer brand: Creality

Printer: K1

Supports: No

Resolution: 0.20 - 0.28

Infill: 5 - 10%

Filament material: PLA

Anycubic resin tray Wash & Cure 3 PLUS support

0.2mm layer, 2 walls, 15% infill