8-Way Aquarium Air Splitter - Print Settings and Description

Description

This practical aquarium accessory distributes air from a single pump to up to 8 separate outlets! The triangular tower design features multiple barbed connectors extending from each side, allowing you to connect multiple air lines for decorations, air stones, or sponge filters. The central vertical tube connects to your air pump, while the angled base provides stability. The top features additional mounting options for secure placement. Perfect for complex aquarium setups requiring multiple air-driven devices from one pump source.

Print Settings

Layer Height: 0.2mm (0.16mm for better air-tight seal quality)

Infill: 50-70% (higher infill for durability and air-tightness)

Infill Pattern: Cubic or gyroid for strength

Supports: Minimal - may need light supports for the barbed connectors

Support Type: Tree supports with lower density to minimize cleanup

Wall Line Count: 4-5 walls for air-tight construction

Top/Bottom Layers: 5-6 layers for solid seal

Print Speed: 40-50mm/s (slower for better layer adhesion and air-tightness)

Nozzle Temperature: 205-215°C (PLA) / 235-245°C (PETG recommended)

Bed Temperature: 60°C (PLA) / 80°C (PETG)

Cooling: 50-75% fan (balance between layer adhesion and detail)

Orientation: Print with the flat base on the build plate as shown in Image 2

Adhesion: Brim or raft recommended for stability

Material: PETG strongly recommended (better water resistance and flexibility for tube connections), or ABS. PLA may work but is less ideal for aquarium use.

Post-Processing:

Remove supports carefully from barbed connectors

Check all air passages are clear

Test fit airline tubing (standard 3/16" or 4/6mm tubing)

Rinse thoroughly before use

Optional: Seal with aquarium-safe silicone if any air leaks detected

Estimated Print Time: 3-5 hours (depending on size and settings)

Usage Notes: Ensure tight connections on all barbs. Use check valves on air lines if needed. The splitter may reduce air pressure to each outlet compared to dedicated lines.

Aquarium Splitter - Support Free

0.16mm layer, 2 walls, 15% infill

0.2mm layer, 2 walls, 15% infill