FULL COLOUR IS ONLY IN THE BAMBU STUDIO 3MF. If you're using another slicer, and the 3MF does not open, please use the RAW STL files.

+You will need to use a brim if you use a Textured PEI plate otherwise parts will fail to stick.

+If you use a cool/smooth plate, you do not need a brim on anything but the beard.

+Superglue is recommended if you use the beard, as it can slip out of the slot if you need to sand the insertion bit.

+The long limbs are a loose option I have provided for those who want them. I would recommend just using the shorter ones.

+The hands/forearms of the MINI Aku do not move even if they look like they should. This size guides those who want to shrink the original two options. MINI is the smallest the model can print before detail gets lost on the face and the shoulder joints start losing strength.

+No supports are required for this model, even if your sliver says it needs them. The ONLY component that needs support is the beard, which is an optional part.

Behold! The Master of Darkness! And no pesky Samurai!

The Shogun of Sorrow is articulated with 12 limb joints and up to 30 body links on his longest size.

He doesn't stand up on his own, due to his long body, but he is my most flexible dragon so far! (My stands, available here on Creality Cloud, support him!)

This model, being so large, can be a filament eater. The short version is my recommendation.

He looks great with or without the beard. It's provided in the optional parts if you choose to use it. Aside from adding supports for the beard, and using a brim if printing on a textured PEI plate, no additional set-up is required for this model.

This file covers personal, non-commercial use; do not share or redistribute without attribution. Do not sell the files or prints of the files. Remixing is allowed but again providing attribution is required.

If you want to sell prints of this model, please visit my Patreon to learn how to obtain a Commercial License: https://www.patreon.com/thomastedwards

Articulated Aku Dragon Toy

0.2mm layer, 2 walls, 12% infill

0.2mm layer, 2 walls, 15% infill

0.2mm layer, 2 walls, 15% infill