📝 PRINT SETTINGS DESCRIPTION

🔥 Purpose-Built Speed Profile for Articulated Prints

This preset is engineered specifically for articulated, print-in-place models like honeycomb drink coasters, fidgets, and flexible tiles. It prioritizes maximum print speed while maintaining clean articulation, dimensional accuracy, and hinge freedom — no post-processing required.

⚙️ Core Optimization Highlights

🧱 Layer Height: 0.24 mm

The optimal balance between speed and surface quality. Reduces total layer count by ~40% compared to 0.15 mm with no visible loss on geometric models.

⚡ Aggressive Acceleration & Motion Tuning

Up to 15 000 mm/s² acceleration

High but safe jerk limits for the Creality K2 Plus

This minimizes time lost to constant start/stop motion common in articulated designs.

🕸️ Ultra-Low Infill (3%)

Decorative-strength infill only — perfect for coasters. Eliminates unnecessary internal passes while keeping the model stable and flat.

🧱 Minimal Top & Bottom Layers

Only what’s structurally required. Internal roofs are avoided to save time and reduce heat buildup near joints.

🔄 Small Perimeter Priority

Most articulated models are dominated by short perimeter segments. This profile allows those moves to run fast instead of being artificially throttled.

🧠 Articulation-Safe Precision Tweaks

🧲 X-Y Hole Compensation: –0.03 mm

Ensures hinges snap free immediately without fusing.

🐘 Elephant Foot Compensation: 0.15 mm (1 layer)

Prevents first-layer squish from locking joints — especially important on PEI plates.

🧼 Optimized Wipe & Retraction Behavior

Reduces pressure artifacts and micro-stops inside hinge gaps, improving both speed and reliability.

🧪 Material & Hardware Compatibility

🧵 Filament: Hyper PLA

🖨️ Printer: Creality K2 Plus (0.4 mm nozzle)

🧊 Cooling: Full fan after layer 2

🛏️ Build Plate: Textured PEI

Hyper PLA’s high flow stability and fast solidification make it ideal for this aggressive profile.

⏱️ Expected Results

✅ Typical articulated coaster print time: ~28–35 minutes

✅ Hinges flex freely straight off the plate

✅ No supports, no glue, no tuning required

✅ Excellent dimensional consistency

✅ Production-ready repeatability

⚠️ Notes

🔹 Designed for speed-first functional prints, not cosmetic showpieces

🔹 Not recommended for silk PLA or low-temp PLA variants

🔹 Do not exceed listed acceleration/jerk values on non-K2 printers

💡 Best used for:

🟢 Drink coasters

🟢 Fidgets & flex toys

🟢 Articulated tiles

🟢 Print-in-place mechanisms

🟢 Batch production runs

Articulated Drink Coaster by Polymeria

Articulated Drink Coaster K2 Plus

Articulated Drink Coaster K1

Articulated Drink Coaster K1 SE