For the center, just use a 1cmx1cm cubed rod for the support. Also, all the body parts are glued together. I really hope you enjoy this model. A attached a spreadsheet so that you know what parts to buy. Those are what I recommend, but you can always make it your own. Also, it might seem like you need two of the wings, but there are only 5 parts. The left upper, left lower, right, body, and back electronics plates. for the body, I recommend printing with at least 45% infill, so it doesn't bend and break under the pressure of the strings. Happy Printing!! (👉ﾟヮﾟ)👉

https://docs.google.com/spreadsheets/d/1Jio5Zmine7CWOunb33UBiV3xxqbEUHFp1ha2vXpquCc/edit?gid=0#gid=0

3/26 New Update (Kinda)

I recently realized that this was a one pickup guitar, which wasnt quite what i want. For those of you that still want the wooden feel of a nice electric guitar, i would either take a 17" x 13" by 2" piece of plywood, or four 2"x4" pieces of plywood and trace the guitar outline onto the wood. (For the one in which you take four pieces of 2 by 4, i would glue it togther using wood glue, then take a type of deep pour apoxy to fill the other gaps. then you can sand, cut and print from there). This option takes a little longer, but then you can change it and customizing it to your liking (I personally wanted to make it a 7 string (or Djent) guitar with two OEM passive pickups.)

If yall want the parts to make it a seven string, or a one, two, or even three pickup guitar, just let me know in the comments what you need help with and ill help you to the best of my ability (and as soon as i can)

*If you want to check out my guitar videos, go to ultimateguitar.com, or download the Ultimate Guitar app and check me out @AlexanderLewis. I upload shots pretty often.*

Playable Boden guitar (Strandberg-ish)

0.2mm layer, 2 walls, 15% infill