Design Concepts

This Mario Boo Ghost model combines the fun and playful elements of a Boo ghost with the iconic cap from a popular video game character. The design is crafted to bring a whimsical twist to the usual ghostly figure. I've remixed the original to split it into separate parts for a non-CFS multi-colour print. If you have a CFS, just follow the link to the original model, but be aware that as designed, the model won't balance and I've also added a flat to the base, so it is free standing.

Applications

Ideal for fans of the gaming series, this model can be used as a decorative piece for game-themed rooms, desks, or to enhance a gaming setup.

Print Recommendations

No need to use a multi-colour 3D printer to capture the distinct red cap and white body. ABS or PLA material is recommended for high quality finish, with 20% infill and supports under the cap and moustache for best results. The tongue will print upright without supports, but you may need to use a brim for several parts as they have a small footprint.

Assembly Instructions

The model is designed to be printed in multiple pieces, eliminating the need for a multi-colour printer. Ensure supports are carefully removed after printing to maintain the smooth surface of the model. Adaptive layers are recommended, especially for the body and cap.
A little trimming was needed for the pins to locate the moustache and the eyes, so they may benefit from a negative horizontal expansion setting.

Mario Boo Ghost

0.2mm layer, 2 walls, 15% infill

Origineel