This is a case for the Caddx Vista. There is a fan in the lid that keeps everything cool. There is a connector on the back that you solder to the unit, so you can easily disconnect the Vista. There is also an opening for the USB-C port. Everything is held together with screws. 4 for the lid, 4 for the caddx vista and 4 for the camera and antenna. The fan is pressed into it.

I printed everything with pla.

Requirements:

- Caddx vista

-Caddx antenna

-5.8GHZ U.FL TO SMA PIGTAIL

-M2x16 screws 4x

-M2x4 screws 4x

-Wood screw of 3mm thick and max 15mm long 4x

-25x25 5v fan

-6 pin Jst 2.0 Ph connector

-DC-DC 12-24V To 5V 3A Step Down

Links:

-25x25 5v fan: https://nl.aliexpress.com/item/1005005458481830.html?spm=a2g0o.order_list.order_list_main.231.21ef79d2HUXHvI&gatewayAdapt=glo2nld

-DC-DC 12-24V To 5V 3A Step Down: https://nl.aliexpress.com/item/4000938525410.html?spm=a2g0o.order_list.order_list_main.345.21ef79d2HUXHvI&gatewayAdapt=glo2nld

-6 pin Jst 2.0 Ph connector: https://nl.aliexpress.com/item/4000091077742.html?spm=a2g0o.order_list.order_list_main.243.21ef79d2HUXHvI&gatewayAdapt=glo2nld

Caddx vista mount with fan

0.2mm layer, 2 walls, 15% infill