第一次入手光固化打印機，選擇使用 HALOT-MAGE S 的定位方案搭配 uw-03 與自動供料系統，使用起來相當方便，可以達到完全不沾手的打印後製作操作，快速且易於使用

不過購買了攝影機之後確實沒有安裝，看其他網友的分享一下攝影機安裝於供料機的位置，因為我已經安裝了供料機

所以只能找其他可能的安裝攝影機的位置。

因此，我在機器右側安裝了這個小平台，印刷文件類似於目前提供的文件

免費提供給大家使用，如果有好的想法與建議，觀迎大家留言~

For my first resin 3D printer, I chose the HALOT-MAGE S with the positioning scheme, paired with the UW-03 and an automatic feeding system. It’s very convenient to use, allowing for completely hands-free post-print processing, making it quick and easy to operate.

However, after purchasing a camera, I didn’t install it right away. I saw other users sharing that they installed the camera on the feeder, but since I already have the feeder installed, I had to find another possible location for the camera.

Therefore, I installed this small platform on the right side of the machine. The printed files are similar to the ones currently provided. I’m offering them for free for everyone to use. If you have any good ideas or suggestions, feel free to leave a comment!

If you need any further assistance or have more questions, feel free to ask!

camera for MAGE S by Gmii

0.2mm layer, 2 walls, 15% infill