Precision-engineered, durable handheld enclosure specifically designed for the Guition JC8048W550 display. The design focuses on mechanical rigidity, a professional industrial look, and easy assembly.

Technical Specifications

External Dimensions: 142 mm x 88 mm x 24 mm.

Material: Optimized for PET-G (no support)

Required Parts:

4x M3x16 Round Head Screws (Button Head).

4x M3 Hexagonal Nuts.

1x CA Glue (Cyanoacrylate).

Connectivity: Precision cutouts for 4P Pogo Pin connector and a dedicated RST (Reset) access hole.

Side Button (SW1): A 3mm access hole is integrated into the side of the case. Please note: The physical button is not included in the STL files; users must design and print their own button to ensure a perfect fit based on their specific material tension and tactile preference.

Assembly Guide

Step 1: Front Panel Preparation

Prepare the hexagonal slots on the inner side of the front panel for nut insertion.

Step 2: Securing the Nuts

Glue the 4x M3 Hexagonal Nuts into the designated slots using CA glue. Ensure they are seated perfectly flat to allow the round head screws to align correctly during final assembly.

Step 3: Rear Cover Check

The rear cover includes precise openings for the Pogo Pin and Reset button. The screw holes feature a Ø6 mm counterbore to neatly house the round heads of the M3 screws for a flush finish.

Step 4: Final Integration

Insert the Guition JC8048W550 display into the main housing. Use shims if necessary to adjust the internal plate fit for a tight, rattle-free result. Secure the back cover using the four M3x16 round head screws.

Component Link:https: //www.aliexpress.com/item/1005005685175586.html?spm=a2g0o.order_list.order_list_main.10.6bc61802Qfe3Wp

Project Type: Handheld Electronics Enclosure

Revision: 1.0

Case Fox PAD- guition jc8048w550 capacitive touch

0.2mm layer, 2 walls, 15% infill