This is a riser stand for the CFS/CFS-C. It features an upper deck to house the CFS unit, and a lower level for storage. The cutter module has also been moved to be inside the stand for easy access for maintenance and purge removal.

Two M4x6 or two M4x8 screw inserts are required for the CFS-C relocation.

Installation Instructions

Follow the Creality after-sales YouTube video on the CFS installation. If installing the CFS-C, remove the screws from the buffer mount plate and transfer to the 3d printed bracket. Additionally, switch from the long CAM cable to the short CAM cable for the buffer module. The clearance is tight for the cutter module, so the change is necessary. That will not affect the functionality of the system, as both cables have the same connector design.

https://cad.onshape.com/documents/e2a7ad390254167b6c14acd7/w/663c48145f9e797fa9060f10/e/d35f614225b919b043eb9be0?renderMode=0&uiState=69c683d1ba4ec256f3d9b085

https://www.youtube.com/playlist?list=PLW9O3eZmo5E2jl7GS32MKqSReBThtql8Y

CFS-C / CFS Upgrade Kit Riser Stand

0.2mm layer, 2 walls, 7.5% infill