*If you have any issues with printing or assembly, feel free to message me, and I'll do my best to assist you 😉.

https://linktr.ee/leoteapproach

/////LINKS FOR THE HARDWARE USED IN ALL MY PROJECTS * affiliate links

INSERTS M3 x 4mm (L) x 5mm (D): https://amzn.to/3EovAVw

HEX SOCKET CAP M3 6mm-30mm (STAINLESS): https://amzn.to/4imGAQW

HEX SOCKET CAP M3 6-20mm (BLACK): https://amzn.to/3R7wjx4

FLAT HEAD SOCKET CAP M3 4mm-12mm (STAINLESS): https://amzn.to/3G3Z1wr

FLAT HEAD SOCKET CAP M3 8mm-25mm (BLACK): https://amzn.to/43JeThP

/////THINGS TO ADD

FRONT CHAIN RISER

https://www.crealitycloud.com/model-detail/67bd6066e12c694d36620946?source=22

/////ATTENTION - PDF GUIDE AVAILABLE

- Make sure the bolts aren't too long. They shouldn't go past the frame's thickness to avoid damaging any internal components.

- Before starting the print of the riser, I recommend printing a tool to test the dimensional accuracy of your printers.

- The riser pieces were developed with very tight tolerances (0.2mm) to ensure proper alignment and functionality of the assembly, so it’s important to make sure everything is well-calibrated and that you understand what is needed for everything to work correctly.

- All parts have been tested and adjusted to ensure compatibility with both K1 and K1C models. The parts shown in the photographs were printed using ABS material (Polymaker). Detailed information about the parts and the settings used can be found in the accompanying PDF.

CREALITY K1|K1C|K1SE - LID RISER V2 [50mm height]

k1c print pefect

0.2mm layer, 3 walls, 15% infill