✅Video:

https://www.youtube.com/watch?v=y4dS_AtD4ho

🛠️ Creality K1 Series Nozzle Cleaner & Maintenance Tool

-Achieve the Perfect First Layer and Prevent Filament Blobs on your K1, K1 Max, K1C, and K1 SE!

-A dirty nozzle is the enemy of a perfect print. Residual filament on the tip can interfere with bed leveling sensors (like LiDAR and probe offset), cause unsightly blobs, and lead to failed prints.

-The Creality K1 Nozzle Cleaner Tool is designed to keep your nozzle pristine, ensuring that your heat block stays clean and your extrusions remain consistent.

⚠️ IMPORTANT: Material Requirement

-Because this tool is designed to work in close proximity to the Heated Bed (which can reach 100°C+) and the Hot Nozzle, it MUST be printed in high-temperature resistant materials.

-DO NOT USE PLA: It will warp or melt due to the radiant heat from the bed and enclosure.

-RECOMMENDED: ABS, ASA, PC (Polycarbonate), or PA (Nylon). These materials ensure the tool remains rigid and functional even during deep cleaning cycles at high temperatures.

✅ Universal K1 Compatibility

This tool is precision-modeled to fit the specific geometry of the Creality K-Series toolheads:

-Creality K1 / K1SE

-Creality K1 Max

-Creality K1C (Perfect for cleaning carbon-fiber residue)

🚀 Why This Tool is Essential:

Heat-Defying Design: Engineered to withstand the intense thermal environment of the K1’s enclosed chamber.

-Prevent "First Layer" Issues: Removes burnt plastic and ooze that can trick the bed-leveling sensors.

-Preserve Your Nozzle: Designed to be used with brass brushes or cleaning needles to extend the life of your high-speed nozzles.

-Pro-Maintenance: Keeps your silicone sock and heater block looking brand new by preventing "plastic creep" up the nozzle threads.

🖨️ Recommended Print Settings

-Material: ABS or ASA (Best balance of heat resistance and ease of print).

-Layer Height: 0.16mm or 0.2mm.

-Infill: 40% (Grid or Gyroid) for structural integrity.

-Walls: 4 for maximum durability.

-Enclosure: Recommended during printing to prevent warping of the tool itself.

Creality K1 Series Nozzle Cleaner Holder Maintenance

0.2mm layer, 2 walls, 15% infill