Creality K2 Plus Poop Chute Basket

Yes, I know there are literally hundreds of K2 Plus poop chutes and baskets. And there is probably at least one that does exactly what mine does in exactly the same way. Great minds think alike, right?

Goals of this design

I made this particular style so it would

Attach to the machine using NO screws.
Stay in place using enough magnets to hold it very strongly
Have a good amount of poop capacity
Have slots on all visible sides to see when it's getting full
Give clearance to the fans on the back of the printer

Printing information

Printed with an 0.4mm nozzle in PLA,
Print took 3h37m and consumed 183 grams of filament
Sparse Infill is set to 35% cubic, but there's not a lot of stress on it, so it could probably be less
Printed with 4/5 walls ("Alternate Extra Walls" turn ON)
Used 3 bottom and 3 top layers, with Rectalinear infill
Supports should NOT be needed,
3MF file includes a 5mm brim, just in case.

Parts needed

Depending on how strongly you want it to stick to the back panel, the design will hold up to 9 cylindrical magnets, 3/16"D x 1/2"L (4.8mm diameter x 12mm long) I got mine from Amazon, at:

https://www.amazon.com/dp/B0DSWJ8T93

Files provided

3MF mesh geometry (310KB)
STL mesh geomety (1MB)
3MF geometry + print settings (from Creality Print) (379KB)

Creality K2 Plus Poop Chute Basket

0.25mm layer, 4 walls, 35% infill